Izdelki za tkanine in tkanine (77)

Ultrablade® HE is a highefficiency fabric designed to reduce the amount of material layers needed to layup in a blade mold. Ultrablade® HE offers process advantages that will help save labor costs while maximizing the speed performance compared to existing UD fabrics. ULTRABLADE® MATERIAL:Ultrablade LTx 1200-2000 TYPE:Unidirectional

790C wet use chopped strand (WUCS), featuring Advantex® glass fibers, is specifically designed for higherfeed rate processes in dry feed applications. EXCELLENT FIRE/FLEXURAL STRENGTH Engineered to provide fire resistance performance and meet regional building codes. Improves flexural strength of wallboards for ease of handling and installation. High strength characteristics to enhance abuse resistant wallboard systems. EFFICIENT PROCESSING Designed to improve higherfeed rate processes where the uniform glass dosage rate and dispersion reduces feed flow variations and causes clumps. ENHANCED GLASS FIBER CHARACTERISTICS Advantex® glass helps fight corrosion, enhancing service life compared to standard Eglass. Boronfree Advantex® glass contributes to decreased emissions, reduces the environmental impact of manufacturing fiberglass, and provides superior performance in corrosive environments compared to standard Eglass. PHYSICAL PROPERTY:Softening Point ADVANTEX(R) GLASS:916 °C TRADITIONAL E-GLASS:850 - 870 °C MOISTURE CONTENT:5.3 - 8.3% % STRAND SOLIDS LEVEL:.14 - .22% FIBER DIAMETER:14.4 - 17.6μ

OptiSpray® F Roving represents a compelling solution for fabricators that want to save time and resin while increasing the performance of their products. INCREASED EFFICIENCY Low fuzz combined with easy chopping, flat lay down and uniform dispersion saves time. REDUCED COST Higher glass loading with optimal resin consumption reduces the amount of expensive resin required. GREAT PERFORMANCE Good mechanical properties, great surface quality, excellent conformability, doesn't trap air, low spring back. FAST WETOUT Designed to provide optimal performance for sprayup applications where fast wetout speed is preferred; great performance in various types of part complexities. Owens Corning also offers Technical Support, which focuses on trouble shooting and increased productivity for our customers.

Rete per delimitazione di cantieri con tessitura in polimeri. Trama: bandella di polietilene ad alta densità stabilizzato UV Ordito: monofilo di polietilene ad alta densità stabilizzato UV

M705 chopped strand mat represents a compelling solution to hand lay up high glass content and thin laminates balanced with good mechanical properties. EASY HANDLING & MOLDABILITY Optimized chop length mix provides good confirmability to complex contoured molds. PROCESS EFFICIENCY Fast wetting and quick air release help reduce the labor required to roll out the part. BALANCED PERFORMANCES Moderate impregnation speed reduces resin consumption, resulting in thinner laminate with high glass content, and improved mechanical properties. ENHANCED SERVICE LIFE Compared to standard Eglass, Advantex® glass helps with enhanced service life in applications facing corrosion. M705 mat is designed for use with unsaturated polyester, vinyl ester resin systems in hand layup applications including automotive parts, boats, chemical tanks and pools. NOMINAL MAT WEIGHT (G/CM2):225 - 300 - 375 - 450 - 600 ROLL WIDTH (CM):95 - 104 - 125 NOMINAL MAT WIDTH (CM):95 -104 -125 ROLL DIAMETER (CM):30 ROLLS PER PALLET:12 PALLET SIZE (CM):127 x 97

Ultrablade® X fabric solutions leverage Owens Corning’s proprietary Hybrid Fabrics, that are specially designed to combine Glass and Carbon fabrics to provide unique advantages for superior performance. PRODUCT BENEFITS Higher stiffness Scalable performance Superior fatigue resistance Reduced cost over carbon materials Suitable for incumbent resin infusion process

Introducing higher performance composites by Owens Corning more modulus, more benefits, more opportunities. This new higher performance glass provides a boost in mechanical properties enhancing part performance or cost optimization through redesign. Reduce the weight of pultruded parts by up to 8% by using higher modulus glass, saving material cost. Improve performance by up to 15% in axial tensile strength for helically wound pipe compared to reference products. The glass can be used in high temperature muffler applications due to an annealing point increase of 25 30°C compared to current products. Higher modulus can enable fiberglass rebar with modulus up to 70 GPa on straight bars. Properties previously unattainable on bent bars can now be achieved. Central strength members can be made 8% lighter, enabling increased fiber optic capacity in the cable. Reduce the weight of parts for automotive applications by up to 9%.

Unifilo® 500 Series continuous filament mats represent a large choice of tailored reinforcement solutions for efficient manufacture of high performance profiles by pultrusion process FREEDOM OF DESIGN AND WHITE COLOR U527 product easily adapts to complex die shapes and preserves part white color. U528X1 product offers a great balance between softness, white color and good tensile strength requirements. PRODUCTIVITY AND HIGH PERFORMANCE U528 product is easy to splice and enables excellent processability. It provides very good mechanical and dielectrical properties to molded parts U529 product higher tensile strength fits the requirement for most challenging profiles and fast pultrusion process speed. CORROSION RESISTANCE Excellent corrosion resistance with Advantex® Glass compared to standard Eglass providing longer service life in applications facing corrosion. Unifilo®500 Series mats are available with varying binder contents to match up with specific customer applications NOMINAL MAT WEIGHT (G/CM2):225 - 300 - 450 - 600 - 900 ROLL WIDTH (CM):127 - 138

OC Paneluxe™ multiend roving represents a compelling solution for panels where excellent translucency performance is required. Produced with patented Advantex® corrosion resistant ECR glass by Owens Corning and compatible with unsaturated polyester resins. EXCELLENT PROCESSING Designed for excellent processing at various line speeds, OC Paneluxe™ roving features easy unwinding and chopping, flat laydown, and uniform dispersion with low fuzz and static. With high impregnation and wetthrough characteristics, the product allows excellent resin flow in translucent applications. IMPRESSIVE AESTHETICS Excellent fiber distribution provides a homogeneous surface aspect with limited fiber prints, resulting in consistent thickness throughout the laminate. Absence of white fibers and fiber springback along with significant reduction of air entrapment ensures excellent translucency of laminates. LINEAR WEIGHT OF ROVING (TEX):2400 YIELDS (YDS/LB):207 LOSS ON IGNITION (%) ISO 1887:1995:0.65

Owens Corning surfacing glass nonwovens key product benefits are high strength performance, hot tensile and thermal stability, helping improved dimensional stability. They help carpet tiles preventing from curling and shrinking. In cushion vinyl flooring, they help improve manufacturing line speed, and installation with less breakage.

ME1510 represents a compelling solution for structural applications requiring high mechanical properties. This multiend roving product increases physical properties – enabling vehicle light weighting, increased fuel efficiency and lower CO2 emissions. EXCELLENT PROCESSABILITY Due to excellent wettability in epoxy and phenolic matrices, very high glass content is achievable, enabling excellent processability while compounding. OUTSTANDING MECHANICAL PROPERTIES Superior strength and flexural modulus enable light weighting in vehicles to increase fuel efficiency, lower CO2 emissions and increase range in electric vehicles. ENHANCED SERVICE LIFE Advantex® glass helps fight corrosion, enhancing service life compared to standard Eglass. FIRE RESISTANT Compatible with phenolic resins used in fire resistance applications such as electric vehicles. HEIGHT (MM):254 NOMINAL WEIGHT (KG):20.5 LINEAR WEIGHT OF ROVING:2400 and 4800 TEX 207 and 103 Yeild LOSS ON IGNITION (%) ISO 1887: 1995:0.7 MOISTURE CONTENT (%) ISO 3344: 1997:≤ 0.10

The Multimat®, Multimat® Lite and Multicore® fabrics are designed for stretchability, high compression resistance that help fast wet out and high mechanical properties; as well as good permeability, high conformability that helps surface aspect and enables various part thickness.

La meilleure solution pour la filtration tertiaire : des rendements élevés d'élimination des solides, une consommation d'eau et d'énergie minimale. Dans la série TF - TV VM (VM = cuve métallique), le support de la toile est constitué d'un tambour en tôle perforée. Ce modèle est utilisé pour les stations d'épuration de petite capacité (jusqu'à 2 000 EH) ou comme traitement secondaire en aval des systèmes de biomasse immobilisée. Il peut être installé dans des cuves en béton ou dans des cuves métalliques. L'équipement est fourni avec un tableau électrique. - Filtration par gravité avec une perte de charge limitée. - Filtration continue sans unité de secours pour les phases de lavage à contre-courant. - Filtre en fibre sans polstoff doté d'une grande résistance mécanique. - Taux de filtration élevé (concentrations de MES < 5 mg/l au refoulement).

PipeStrand® S1000, made for fabricators that want to reduce material cost, while increasing product performance. Designed to provide excellent hydrostatic bases, fight corrosion, increase efficiency and service life in the lowpressure filamentwound pipe, tank and vessel markets OUTSTANDING MECHANICAL PROPERTIES Excellent shear and hydrostatic properties in all major resin systems, provide maximum part strength, long service life and hydrostatic design basis. REDUCE COST Fast, uniform strand wetout in all major resin systems, results in optimized part production speed and increased productivity, reducing manufacturing costs. MULTIRESIN COMPATIBILITY Excellent glass/resin bonding in polyester, vinyl ester, polyurethane, acrylic, and epoxy resins, providing the processor maximum flexibility with one input glass. This reduces inventory and eliminates the need for costly downtime and labor during product change overs.

Owens Corning® Milled Fibers are designed to enhance mechanical properties, increase stiffness, improve dimensional stability, and minimize distortion under elevated temperatures. EXCELLENT DISPERSION & IMPREGNATION Predispersed nature promotes excellent dispersion in the matrix. Shortfiber thermoplastic compounds will show improved melt flow characteristics with shorter input fiber lengths. IMPRESSIVE AESTHETICS Fiber length and excellent distribution qualities provide a homogeneous, highly pigmentable surface with limited fiber prints and good color. ENHANCED PART STRENGTH Glass reinforced parts exhibit improved mechanical properties, modulus and dimensional stability. Powder Relatively freeflowing with a high bulk density for use in formulations requiring very uniform dispersion and short fibers with median fiber lengths typically in the range of 40 110 microns.

U801/U809 continuous filament mats represent specific solutions to homogeneously reinforce expanded polyurethane foam. CUSTOMIZED FOR P U FOAM PROCESS U801/U809 specific design helps to even mat expansion during the PU foaming process. U809 is compatible with CO2 blowing agent used in insulating material manufacturing process. Excellent glass/polyurethane bonding brings improved mechanical performance and dimensional stability to the PU foam. U801 superior drapability fits the most complex mold shapes. CORROSION RESISTANCE Excellent corrosion resistance with Advantex® Glass compared to standard Eglass providing longer service life in applications facing corrosion. U801/U809 mats are compatible with polyurethane resin systems and designed for PU foam reinforcement process. U809 is suited for LNG (Liquified Natural Gas) carrier cryogenic insulating systems. U801 is recommended for PU foam reinforcement in replacement of wood structure, in housing and recreational vehicle applications. NOMINAL MAT WEIGHT (G/CM2):225 - 300 - 450 - 600 - 900 NOMINAL MAT WEIGHT (OZ./SQ.FT):0.75 - 1.0 - 1.5 - 2.0 - 3.0 ROLL WIDTH (CM):127 - 128

SE8400 Type 30™ singleend roving is specifically designed for pultrusion processing in applications requiring high electrical resistance. Produced with Advantex®, corrosionresistant ECR glass technology by Owens Corning. Compatible with polyester, vinyl ester and epoxy resins. EFFICIENT PROCESSING Better wetout in polyester, vinyl ester, and epoxy resin, offering fast processing and good glasstoresin bonding, resulting in optimized part production. Good wetout and resin bonding results in excellent visual appearance of parts produced. GOOD MECHANICAL PROPERTIES Low seed glass results in excellent dielectric properties which are ideal for applications requiring high electrical resistance. ADVANCED SERVICE LIFE Advantex® corrosion resistant glass fiber combined with low seed glass is ideal for longterm electrical, physical, and acid resistance, reducing the potential for costly brittle fracture failures in the field. STRAND TENSILES: ASTM D 2343:Tensile Strength, psi (Mpa) AVG. E-701 POLYESTER RESIN:353,900 (2440) % GLASS :58.8 AVG. DER 331 EPOXY RESIN:338,800 (2336) % GLASS:54.5 TEX:4400 YIELD:113 MANUFACTURING REGION:North America

158B Roving is specifically designed for use in filament winding applications using epoxy resin, where high strength is required. 158B is suitable to reinforce phenolic resins. Fast wetout properties and high burst strength maximize customers’ processing and minimize costs.EXCELLENT PROCESSING Smooth runout combined with low fuzz properties, result in smoother parts and less downtime for cleanup, enabling higher efficiencies and lower manufacturing costs. FAST WETOUT Allows the processor to optimize part production speed resulting in increased productivity and reduced costs. HIGH BURST STRENGTH Excellent glass/resin bonding, which provides high burst strength in pipe or vessels. CORROSION RESISTANT Excellent corrosion resistance with Advantex® Glass compared to standard Eglass providing longer service life in applications facing corrosion.

La rete Sicurvit, nei tipi SN 300 e SN 400, è fabbricata in nylon poliammide alta tenacità con particolare tessitura piatta a maglia romboidale a losanga, con effetto assorbente di elasticità, antiurto. È raccomandata per la protezione nei cantieri come anticaduta uomo nelle operazioni di montaggio e installazione campate o strutture varie. Indicata anche come rete da sollevamento nel caso si renda necessaria una grande portata in spazi ristretti. Ideale per il contenimento di materiali di grosse dimensioni.

9703 wet use chopped strand (WUCS), featuring Advantex® glass fibers, is designed for improved line speeds and product strength in the manufacturing of wetprocess glass veils. Provides strength and durability for construction, home furnishings and asphalt roofing shingles. EXCELLENT TENSILE STRENGTH Desirable veil and wet web strength for demanding construction and enduse products for home furnishings. EFFICIENT PROCESSING Designed to improve wet web strength in nonwovens processing, allowing improved line speed and reduced veil defects. IMPRESSIVE MECHANICAL PROPERTIES Advantex® glass helps fight corrosion, enhancing service life compared to standard Eglass. Boronfree Advantex® glass, contributes to decreased emissions, reduces the environmental impact of manufacturing fiberglass, and provides superior performance in corrosive environments compared to standard Eglass.

Najlepsze rozwiązanie do filtracji trzeciorzędowej: wysoka wydajność usuwania ciał stałych, minimalne zużycie wody i energii. W przypadku serii TF - TV VM (VM = zbiornik metalowy) wspornik tkaniny jest wykonany z perforowanego bębna z blachy metalowej. Model ten jest stosowany w oczyszczalniach ścieków o małej wydajności (do 2.000 PE) lub jako oczyszczanie wtórne za systemami z unieruchomioną biomasą. Jest on dostępny do instalacji w zbiornikach betonowych lub metalowych. Urządzenie jest dostarczane z rozdzielnicą elektryczną. - Filtracja grawitacyjna z ograniczoną stratą ciśnienia. - Filtracja ciągła bez jednostek rezerwowych dla faz płukania wstecznego. - Filtr tkaninowy z włókna bez poliestrowego o wysokiej wytrzymałości mechanicznej. - Wysoka szybkość filtracji (stężenie TSS < 5 mg/l na wylocie).

Realizzata principalmente per la costruzione di voliere e gabbie di allevamento per la selvaggina, ma adatta anche alla funzione di protezione anti-predatori, la volitex è una rete fabbricata in monofili di polietilene di colore nero ad alta densità stabilizzato alla luce. Questo conferisce al prodotto una lunga durata nel tempo all’esposizione ai raggi del sole. Inattaccabile alle muffe, imputrescibile ed impermeabile, la volitex in caso di pioggia, brina o neve non assorbe acqua e quindi non si gonfia né aumenta di peso. Le reti vengono solitamente fornite a maglia quadrata e sono quindi estremamente facili ad installare grazie alla loro stabilità dimensionale. La produzione standard annovera le seguenti misure di maglia adatte a soddisfare il più possibile le esigenze collegate alla taglia raggiunta dai vari animali nelle progressive fasi dell’allevamento.

CS1530 Wet Used Chopped glass fiber represents a compelling reinforcement solution through optimizing the wallboard manufacturing process while increasing product performance.STRENGTH Improves flexural strength by +28% and shear strength by +13% vs. unreinforced wallboard. FIRE SAFETY Meets UL 263 and CAN/ULC S101 standards for fire endurance testing. Stable fiber dosage performance in customer vibratory feed systems, leading to improved consistency of fiber content in wallboard. 66% reduced drift in target fiber feed rate over time 50% reduction in fiber feed rate variability over time. (Illustration Improved Stability and Reduced Variability in Fiber Dosage Rate.) The product helps with reduced line downtime, reduced scrap rate and reduced fiber feed maintenance. (Illustration Reduced Fiber Buildup in Vibratory Feed Systems.) MANUFACTURING REGION:USA PRODUCT:CS1530 FIBER LENGTH:13mm (1/2”)

UNICONFORM® mat is well suited for very complex forms requiring high deformation in closed molding process, and enables excellent translucency in panel applications. CHALLENGING APPLICATIONS Good drapability and highstretching provide ease of conformability and deformability to complex contours, while easy splicing and overlapping enable large and complex part design. IMPROVED SURFACE AESTHETICS The open mat structure enables a consistent resin distribution throughout the surface, providing a smooth appearance behind the gelcoat. Excellent panel clarity and translucency is provided by the use of glass material — no synthetic core or stitching. IMPROVED PERFORMANCES Continuous fibers provide high tensile and flexural performance to the final part. Lack of chemical binder provides improved smoke and fire resistance properties. NOMINAL MAT WEIGHT (G/CM2):450 - 600 - 750 - 900 - 1200 -1800 - 2400 OZ./SQ.FT:1.5 - 2.0 - 2.5 - 3.0 - 4.0 - 6.0 - 8.0

SE4850 singleend Type 30™ roving represents a compelling solution for Polypropylene in Direct Long Fiber Thermoplastics (DLFT) applications where improved performance and manufacturing economics is required. Improved resistance to fuzz generation for easier processing and improved housekeeping. Reduced strand stiffness for easier splaying. Increased lubricity for lower strand tension. Improved splice tensile strength for enhanced packagetopackage transfer and improved line efficiencies. Outstanding compatibility with PP for better wetout and dispersion. Optimized adhesion to PP to meet or exceed all mechanical performance needs. Rovings are available in a singleend internalpull package. Each pallet weighs about 1 ton and can be packaged in bulk or CreelPak™ packaging format. Pallets are stretch wrapped for load stability and for protection during transport.

La meilleure solution pour la filtration tertiaire : des rendements élevés d'élimination des solides, une consommation minimale d'eau et d'énergie. La série PPC - PPC VM (VM = cuve métallique) a été développée pour les installations ayant un potentiel moyen-grand. Pour les filtres de cette gamme, le lavage des toiles se fait avec deux pompes seulement (dont une pompe de secours) qui desservent tous les disques. La sélection des disques sur lesquels le lavage à contre-courant doit être effectué (en séquence) est réalisée à l'aide de vannes à double effet à commande pneumatique. Le plus grand modèle standard de cette série a une surface filtrante de 160 m2 et peut traiter une charge équivalente à une communauté d'environ 50 000 EH. Cette série se distingue par sa faible consommation d'énergie, d'autant plus appréciable que le potentiel de l'installation augmente. - Filtration par gravité avec une perte de charge limitée.

La meilleure solution pour la filtration tertiaire : des rendements élevés d'élimination des solides, une consommation d'eau et d'énergie minimale. La filtration tertiaire est fortement influencée par le profil hydraulique de l'installation, qui ne peut souvent pas être modifié. Dans la série des filtres à disques PECV VM (VM = réservoir métallique), l'arbre de collecte est placé verticalement. L'objectif est d'alimenter l'équipement complètement immergé, même avec des profils hydrauliques très bas. Même pour cette série, le lavage des toiles se fait à l'aide de pompes, chacune d'entre elles étant desservie par deux disques ou plus. Les pompes sont actionnées en séquence afin de ne pas perturber la fonctionnalité du système. La solution PECV VM est idéale pour les systèmes sans surveillance de petite et moyenne taille avec des charges lourdes et extrêmement variables. Le plus grand modèle de cette série peut traiter une charge équivalente à une communauté d'environ 10 000 EH.

Najlepsze rozwiązanie do filtracji trzeciorzędowej: wysoka wydajność usuwania ciał stałych, minimalne zużycie wody i energii. W serii PEC - PEC VM (VM = metalowy zbiornik) płukanie tkaniny odbywa się za pomocą pomp, z których każda jest obsługiwana przez dwa lub więcej dysków. Pompy są uruchamiane sekwencyjnie, aby nie zakłócać funkcjonalności systemu. Rozwiązanie PEC - PEC MT jest idealne dla małych i średnich systemów bezobsługowych z dużymi i bardzo zmiennymi obciążeniami. Największy model z tej serii może przetwarzać obciążenie równe około 20 000 PE. Różne modele mogą być instalowane równolegle w celu uzyskania różnych wydajności roboczych. - Filtracja grawitacyjna z ograniczoną stratą ciśnienia. - Ciągła filtracja bez jednostek rezerwowych dla faz płukania wstecznego. - Filtr tkaninowy z włókna bez poliestrowego o wysokiej wytrzymałości mechanicznej. - Wysoka szybkość filtracji (stężenie TSS < 5 mg/l na wylocie).

UNIFILO® 700 Series continuous filament mats represent a large choice of tailored preforming solutions for closed mold process. EASY PROCESSING S744, S750 products enable extra stretch and good resin flow for deeper draw applications. U746 product provides good stretch and excellent resin flow required in multilayer applications. ENHANCED MECHANICAL PROPERTIES T750, T754 products provide enhanced mechanical properties in the crossmat direction. U720 product provides stronger and more durable preforms. It is well suited for automated processes. CORROSION RESISTANCE Excellent corrosion resistance with Advantex® Glass compared to standard Eglass providing longer service life in applications facing corrosion. U700 products are available with varying filament layout and binder contents to match up with specific customer applications. NOMINAL MAT WEIGHT (G/CM2):300 - 450 - 600 NOMINAL MAT WEIGHT (OZ./SQ.FT.):1.0 - 1.5 - 2.0 ROLL WIDTH (CM):50 to 306 ROLL WIDTH (CM):19.7 to 120.5

Najlepsze rozwiązanie do filtracji trzeciorzędowej: wysoka wydajność usuwania ciał stałych, minimalne zużycie wody i energii. Seria PPC - PPC VM (VM = zbiornik metalowy) została opracowana dla zakładów o średnim i dużym potencjale. W przypadku filtrów z tej serii płukanie tkaniny odbywa się za pomocą tylko dwóch pomp (w tym jednej pompy zapasowej), które obsługują wszystkie dyski. Wybór dysków, na których przeprowadzane jest płukanie wsteczne (w kolejności), odbywa się za pomocą zaworów dwustronnego działania ze sterowaniem pneumatycznym. Największy standardowy model z tej serii ma powierzchnię filtrującą 160 m2, która może przetwarzać obciążenie równe około 50.000 PE. Wyjątkową cechą tej serii jest niskie zużycie energii, jeszcze bardziej zauważalne przy rosnącym potencjale instalacji. - Filtracja grawitacyjna z ograniczoną stratą ciśnienia. - Ciągła filtracja bez jednostek rezerwowych dla faz płukania wstecznego.